OSHA for Small Businesses: What You’re Required to Have
By John Hamilton, MS, PHRca, PHR · Reviewed for legal currency August 2026
I am not an attorney. This article is general information based on my experience as an HR professional, and it is not legal advice. For legal advice about your situation, consult a qualified attorney.
The short version
- The OSH Act reaches almost every employer with one or more employees.
- Ten or fewer employees exempts you from routine recordkeeping only. The General Duty Clause, the poster, hazard communication and injury reporting still apply.
- Report a fatality within 8 hours, and a hospitalization, amputation or loss of an eye within 24 hours.
Fixing an HR mistake after the fact costs more than preventing it. Subscriptions start at $139 a month, and every plan includes a custom employee manual. Call (562) 444-8076, email service@accomplicenter.com, or come by our store at 3217 Carson St in Lakewood to sign up.
The Occupational Safety and Health Act applies to almost every private employer in the United States. There are some exceptions (self-employed individuals with no employees, family-only farms, certain federal agency employees with their own programs), but the general rule is that if you have one or more employees, you’re covered.
Most small employers don’t think about OSHA until something goes wrong. The most common version of “wrong” isn’t an inspection (small-employer inspections are rare). It’s an injury that triggers reporting, an employee complaint that triggers investigation, or a customer or partner asking for proof of a safety program before doing business.
The general duty clause
Section 5(a)(1) of the OSH Act, the “general duty clause,” requires employers to furnish a workplace “free from recognized hazards that are causing or are likely to cause death or serious physical harm.” This is the catch-all that applies even when no specific OSHA standard covers a hazard.
The general duty clause is broad and discretionary. OSHA can cite an employer for hazards that aren’t specifically regulated if those hazards meet the test (recognized, likely to cause harm, employer has a feasible means of addressing). The standard is fact-specific and gets applied case by case.
For a small employer, the practical implication is that you have an obligation to identify the hazards your specific work creates and to address them. There isn’t a universal checklist. Your obligations depend on what your employees actually do.
Specific OSHA standards
Beyond the general duty clause, OSHA has thousands of specific standards covering specific hazards. The ones most relevant to small employers:
- Hazard Communication Standard. If your workplace uses chemicals, you have to maintain Safety Data Sheets, label containers, and train employees on the chemicals they work with. This applies to a lot of small employers (restaurants, auto shops, salons, anyone using cleaning products in commercial volumes). OSHA pushed the compliance dates for the updated standard back four months in January 2026: employers have until November 20, 2026 for substances and May 19, 2028 for mixtures to update workplace labeling, the written program and training.
- Recordkeeping Standard. Employers with more than 10 employees in most industries are required to keep an OSHA 300 Log of work-related injuries and illnesses, post the OSHA 300A Summary annually (February 1 to April 30), and submit electronic data to OSHA in some cases. Some industries are exempt; check the exemption list.
- Personal Protective Equipment Standard. Required PPE for specific hazards must be provided, fitted, and maintained. Generally at the employer’s cost.
- Bloodborne Pathogens Standard. For workers who may be exposed to blood or other potentially infectious materials. Healthcare, dental, certain other industries. Specific training and exposure-control plan requirements.
- Walking-Working Surfaces Standard. Floor surfaces, working surfaces, fall protection. Significant for construction, warehousing, retail with high storage.
- Electrical Standards. Specific requirements for electrical safety in commercial workplaces.
- Industry-specific standards. Construction has its own set of standards (29 CFR 1926). Maritime has its own. Agriculture has its own. Healthcare has additional requirements.
For a small employer, the right approach is to identify which specific standards apply to your industry and your specific hazards. OSHA’s website has industry-specific guides for most categories of small business. The compliance burden is manageable when you focus on the standards that actually apply.
Posters
Federal OSHA requires the “Job Safety and Health: It’s the Law” poster posted in a conspicuous location in every covered workplace. Free from OSHA. Update when OSHA issues new versions.
State plan states have their own posters that supplement or replace the federal one. California, Washington, Oregon, Michigan, New Mexico, Nevada and sixteen others run programs covering private employers. New Jersey and New York run public-employee-only plans, so a private employer in those states posts the federal notice.
Recordkeeping
If you’re not in an exempt industry and you have more than 10 employees, you’re required to keep the OSHA 300 Log. The log captures work-related injuries and illnesses meeting recording criteria (death, days away from work, restricted work, medical treatment beyond first aid, loss of consciousness, significant injury or illness diagnosed by a healthcare professional).
Each recordable case requires a 301 Incident Report (OSHA Form 301 or equivalent) with details about the case.
The 300A Summary aggregates the 300 Log entries for the year. The 300A has to be posted in the workplace from February 1 through April 30 each year.
Certain establishments have to submit their injury data electronically to OSHA by March 2 each year. Establishments with 100 or more employees in the designated high-hazard industries submit the 300 Log and the 301 forms along with the 300A. Establishments with 20 to 249 employees in the designated industries submit the 300A only. The Injury Tracking Application opens January 2.
Injury reporting (separate from recordkeeping)
Beyond the 300 Log, certain serious incidents have to be reported to OSHA directly within specific timeframes:
Fatalities. Reportable to OSHA within 8 hours.
Hospitalizations (in-patient hospitalization of one or more employees from a work-related incident). Reportable within 24 hours.
Amputations. Reportable within 24 hours.
Loss of an eye. Reportable within 24 hours.
The reporting goes to OSHA at 1-800-321-OSHA, the OSHA area office, or via the OSHA online reporting portal. The reporting is in addition to recording on the 300 Log.
Failure to report on time is its own violation, separate from any underlying safety issue.
Penalties are worth knowing before you need them. The current maximums are $16,550 for a serious, other-than-serious, or posting violation, $16,550 per day for failure to abate past the abatement date, and $165,514 for a willful or repeated violation with an $11,823 minimum for willful. These are the 2025 figures carried forward: the government shutdown prevented the Bureau of Labor Statistics from producing the inflation index the statute requires, so there was no January 2026 increase. Expect one next year.
State-plan states
- There are 29 OSHA-approved state plans. Twenty-two of them cover private employers as well as state and local government; the other seven (Connecticut, Illinois, Maine, Massachusetts, New Jersey, New York and the Virgin Islands) cover public employees only. State plans often have additional standards and stricter requirements.
- California (Cal/OSHA). One of the most aggressive state programs. Several Cal/OSHA-specific standards (heat illness prevention, ergonomics, workplace violence prevention plan under SB 553 effective July 1, 2024).
- Washington, Oregon. Both operate state plans with their own standards.
Other state-plan states covering private employers: Alaska, Arizona, Hawaii, Indiana, Iowa, Kentucky, Maryland, Michigan, Minnesota, Nevada, New Mexico, North Carolina, Puerto Rico, South Carolina, Tennessee, Utah, Vermont, Virginia and Wyoming. Connecticut, Illinois, Maine, Massachusetts, New Jersey and New York run public-employee-only plans, so a private employer in those states answers to federal OSHA.
If you’re in a state-plan state, your operational requirements may exceed what federal OSHA requires. The most consequential is California’s broad set of state-specific standards.
Operational practices for small employers
A few practices that make compliance manageable:
- Identify your hazards. Walk through your workplace. Think about what could go wrong. Make a list of the specific hazards your employees encounter.
- Address each hazard. Engineering controls (eliminating the hazard) are best. Administrative controls (procedures and training) are second. PPE is the last line.
- Document the safety program in writing. Even where not specifically required, a written safety program is the document that demonstrates you’ve thought about safety. Includes hazard assessment, controls, training, incident investigation, review cadence.
- Train employees on the hazards they face. Document the training. Date, content, attendees, signatures.
- Investigate every incident, even the minor ones. Near-misses included. Document the investigation, the root cause, and the corrective action.
- Post the required posters. Federal, state, and any required notices.
Keep your 300 Log if applicable. Post the 300A annually.
Report serious incidents on time. Have the OSHA reporting number readily accessible.
What this looks like in your manual
Your handbook should have a workplace safety section that:
References the company’s commitment to a safe workplace. References specific safety policies (drug and alcohol, workplace violence prevention if applicable, hazard communication if applicable, others). Describes the injury reporting process for employees. Confirms employees won’t be retaliated against for reporting safety concerns. Describes the company’s safety program (training, walkthroughs, incident investigation). References return-to-work and light-duty programs if you have them.
We include this in the custom employee manual that comes with every AccompliCenter HR subscription. The section is tailored to your industry’s specific OSHA standards and your state’s specific requirements (Cal/OSHA gets a longer section than federal-only states). Plans start at $139 a month.
OSHA compliance at a small employer isn’t usually about responding to inspections. It’s about preventing the incident that triggers the inspection in the first place, and being able to demonstrate the safety program when an incident does happen. The investment is small. The cost of a serious incident is large. The investment is also part of treating your employees like the assets they are: their safety isn’t a regulatory line item, it’s the foundation of working at your business.
To subscribe, call us at (562) 444-8076, stop by our store at 3217 Carson St in Lakewood, or email service@accomplicenter.com.
See AccompliCenter HR plans →